 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| v00.1104 HMC441LC3B GaAs PHEMT MMIC MEDIUM POWER AMPLIFIER, 6 - 18 GHz Features Gain: 17 dB Saturated Power: +22 dBm @ 27% PAE Single Supply Voltage: +5.0 V 50 Ohm Matched Input/Output RoHS Compliant 3 x 3 mm SMT package 8 AMPLIFIERS - SMT Typical Applications The HMC441LC3B is ideal for use as a medium power amplifier for: * Point-to-Point Radios * Point-to-Multi-Point Radios & VSAT * LO Driver for HMC Mixers * Military EW & ECM Functional Diagram General Description The HMC441LC3B is an efficient GaAs PHEMT MMIC Medium Power Amplifier housed in a leadless "Pb free" RoHS compliant SMT package. Operating between 6.0 and 18.0 GHz, the amplifier provides 17 dB of gain, +22 dBm of saturated power and 27% PAE from a +5.0 V supply voltage. This 50 Ohm matched amplifier does not require any external components, making it an ideal linear gain block or driver for HMC SMT mixers. The HMC441LC3B allows the use of surface mount manufacturing techniques. Electrical Specifications, TA = +25 C, Vdd = +5V Parameter Frequency Range Gain Gain Variation Over Temperature Input Return Loss Output Return Loss Output Power for 1 dB Compression (P1dB) Saturated Output Power (Psat) Output Third Order Intercept (IP3) Noise Figure Supply Current (Idd) 16 10 Min. Typ. 6.0 - 8.5 14 0.015 10 12 19 20 30 4.5 95 17 0.02 13 Max. Min. Typ. 8.5 - 12.5 17 0.015 13 15 20 21.5 32 4.5 95 17 0.02 14 Max. Min. Typ. 12.5 - 14.0 17 0.015 20 17 20 22.5 32 4.5 95 17 0.02 10 Max. Min. Typ. 14.0 - 18.0 14 0.015 13 14 20 21.5 32 4.5 95 0.02 Max. Units GHz dB dB/ C dB dB dBm dBm dBm dB mA 8 - 200 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com v00.1104 HMC441LC3B GaAs PHEMT MMIC MEDIUM POWER AMPLIFIER, 6 - 18 GHz GaAs MMIC SUB-HARMONICALLY Gain vs. Temperature PUMPED MIXER Broadband Gain & Return Loss 20 15 10 Response (dB) 5 0 -5 -10 -15 -20 -25 4 6 8 10 12 14 16 18 20 FREQUENCY (GHz) GAIN (dB) S21 S11 S22 17 - 25 GHz 8 AMPLIFIERS - SMT 8 - 201 20 18 16 14 12 10 8 6 4 2 0 6 7 8 9 10 11 12 13 14 15 16 17 18 FREQUENCY (GHz) +25C +85C -40C Input Return Loss vs. Temperature 0 +25C +85C -40C Output Return Loss vs. Temperature 0 -2 -5 RETURN LOSS (dB) -4 RETURN LOSS (dB) -6 -8 -10 -12 -14 -16 -18 +25C +85C -40C -10 -15 -20 -25 6 7 8 9 10 11 12 13 14 15 16 17 18 FREQUENCY (GHz) -20 6 7 8 9 10 11 12 13 14 15 16 17 18 FREQUENCY (GHz) P1dB vs. Temperature 25 24 23 22 P1dB (dBm) 21 20 19 18 17 16 15 6 7 8 9 10 11 12 13 14 15 16 17 18 FREQUENCY (GHz) +25C +85C -40C Psat vs. Temperature 25 24 23 22 Psat (dBm) 21 20 19 18 17 16 15 6 7 8 9 10 11 12 13 14 15 16 17 18 FREQUENCY (GHz) +25C +85C -40C For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com v00.1104 HMC441LC3B GaAs PHEMT MMIC MEDIUM POWER AMPLIFIER, 6 - 18 GHz 8 AMPLIFIERS - SMT Power Compression @ 11 GHz 30 Pout (dBm), GAIN (dB), PAE (%) 25 20 15 10 5 0 -10 Pout Gain PAE Power Compression @ 15 GHz 30 Pout (dBm), GAIN (dB), PAE (%) 25 20 15 10 5 0 -10 Pout Gain PAE -8 -6 -4 -2 0 2 4 6 8 10 -8 -6 -4 -2 0 2 4 6 8 10 INPUT POWER (dBm) INPUT POWER (dBm) Output IP3 vs. Temperature 36 34 Noise Figure vs. Temperature 10 9 8 NOISE FIGURE (dB) +25C +85C -40C 32 OIP3 (dBm) 30 28 26 24 22 20 6 7 8 9 10 11 12 13 14 15 16 17 18 FREQUENCY (GHz) +25C +85C -40C 7 6 5 4 3 2 1 0 6 7 8 9 10 11 12 13 14 15 16 17 18 FREQUENCY (GHz) Gain, Power & OIP3 vs. Supply Voltage @ 11 GHz GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm) 34 32 Reverse Isolation vs. Temperature 0 -10 ISOLATION (dBm) -20 -30 -40 -50 -60 6 7 8 9 10 11 12 13 14 15 16 17 18 +25C +85C -40C 30 28 26 24 22 20 18 16 14 4.5 5 Vdd Supply Voltage (Vdd) 5.5 Gain P1dB Psat OIP3 FREQUENCY (GHz) 8 - 202 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com v00.1104 HMC441LC3B GaAs PHEMT MMIC MEDIUM POWER AMPLIFIER, 6 - 18 GHz Absolute Maximum Ratings Drain Bias Voltage (Vdd) RF Input Power (RFin)(Vdd = +5.0 Vdc) Channel Temperature Continuous Pdiss (T = 85 C) (derate 10 mW/C above 85 C) Thermal Resistance (channel to ground paddle) Storage Temperature Operating Temperature ESD Sensitivity (HBM) +6.0 Vdc +20 dBm 150 C 0.65 W 100 C/W -65 to +150 C -40 to +85 C Class 1A Typical Supply Current vs. Vdd Vdd (V) +5.5 +5.0 +4.5 Idd (mA) 96 95 94 8 AMPLIFIERS - SMT 8 - 203 Note: Amplifier will operate over full voltage range shown above Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: COLD FLASH OVER Ni. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com v00.1104 HMC441LC3B GaAs PHEMT MMIC MEDIUM POWER AMPLIFIER, 6 - 18 GHz 8 AMPLIFIERS - SMT Pin Descriptions Pin Number Function Description Interface Schematic 1, 3, 7, 8 GND Package bottom must also be connected to RF/DC ground 2 RFIN This pin is AC coupled and matched to 50 Ohms from 6 - 18 GHz. 4 - 6, 10 - 12 N/C This pin may be connected to RF/DC ground. Performance will not be affected. 8 RFOUT This pin is AC coupled and matched to 50 Ohms from 6 -18 GHz. 11 Vdd Power Supply Voltage for the amplifier. External bypass capacitors are required. Application Circuit Component C1 C2 C3 Value 100 pF 1,000 pF 2.2 F 8 - 204 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com v00.1104 HMC441LC3B GaAs PHEMT MMIC MEDIUM POWER AMPLIFIER, 6 - 18 GHz Evaluation PCB 8 AMPLIFIERS - SMT List of Material for Evaluation PCB 109712* Item J1 - J2 J3 - J4 C1 C2 C3 U1 PCB* Description PC Mount SMA Connector DC Pin 100 pF Capacitor, 0402 Pkg. 1000 pF Capacitor, 0603 Pkg. 2.2 F Capacitor, Tantalum HMC441LC3B Amplifier 109710 Evaluation PCB, 10 mils ** Circuit Board Material: Rogers 4350 ** Reference this number when ordering complete evaluation PCB The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 205 |
Price & Availability of HMC441LC3B
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |